Material |
Housing/Base/Cage |
PA66 |
Body/Hex Nut/ Metal Ball/ Push Nut/ Holder/ Cover/Gland Nut/ Spring |
SUS |
Contacts |
Copper Alloy With Au Plating |
O-Ring/Gasket/Gland |
Silicone |
Glue |
Epoxy |
Technical Data |
Visual and Dimensional Inspection |
Must meet or exceed the requirements specified by the most current version of the GT2612 Specification. |
Insulation Resistance |
DC500V±10%,test for 1 minute and the insulation resistance should be more than100MΩ |
Withstanding Voltage |
650 VAC between contacts , 650 VAC between contacts and metal-housing, for 1±5s min. |
Contact Resistance |
10mΩ at 10mA Max. |
Pin Pull Test |
1. Initial: 24 N minimum.
2. After Test: 16 N minimum. |
Durability |
2000 cycles insertion/extraction cycles at a maximum rate of 200cycles per hour. |
Physical Shock |
No discontinuities of 1 μs or longer duration when mated are subjected to 11 ms duration 30 Gs half-sine shock pulses. Three shocks in each direction applied along three mutually perpendicular planes for a total of 18 shocks. |
Random Vibration |
The electrical load conditions shall be 100mA maximum for all contacts.
Frequency: 50 to 2000 Hz
PDS: 0.04 g² /Hz.
Duration: 1 Hour/Axis, 3 Axes Total.
g’s: 7.56 g rms |
Thermal Shock |
5 cycles at -40°C / +105°C, after the test, the function and appearance can't be impacted. |
Humidity Life |
96 hours minimum (seven step cycles). |
Salt Spray |
The test liquid (Nacl) thickness is 5%, Compressing the air pressure is 0.083Mpa, Spraying amount is 1~2 ml/80cm/h, Temperature of the pressure barrel is 43°C, LAB temperature is 35°C, relative humidity of LAB is 95%~98%, test time is 48hours, after the test, check if there is rusty and oxidized phenomenon. |
Waterproof Test |
Submersion in water 1 meter for 24 hours. |
Temperature Life |
85°C for 48Hours Method A, Mated |
Cycling Humidity |
4 cycles at 25°C / +85°C 95%RH (1 cycles/day) |
UV Exposure |
24Hr equal 1 year: Total require 3 years
8 h UV at 70 (±3) °C Black Panel Temperature
4 h Condensation at 50 (±3) °C Black Panel Temperature |